|
Szczegóły Produktu:
Zapłata:
|
| High Light: | solar panel roof mounts,aluminum frames for solar panels |
||
|---|---|---|---|
High Intensity End Clamp For Solar Roof Mounting System With Anodized Surface
5. Material AL6005-T5 & SUS 304 bolt
6. High class anodized aluminium
Solar framed panel mounting end clamp
|
Solar Clamp |
|
|
End Clamp (Fix 35mm/40mm/45mm/50mm solar panel frame) |
|
|
Item NO |
Specification |
|
HT35 |
End Clamp 35mm |
|
HT40 |
End Clamp 40mm |
|
HT45 |
End Clamp 45mm |
|
HT50 |
End Clamp 50mm |
Order,payment,terms,shipment
1, Minimum order:500pcs per trial order .Free sample is available .
2, Free sample is available . ( Before sending the samples to customer, samples should pass strict test in our lab. )
3,Production Lead time: it depends on customers' order quantity .
Features of mounting system
1. Widely Application
The structure is 100% made of anodized aluminum/galvanized steel,with the quality of corrosion-resistance,light-weight andstrong intensity. It can be used in extremely bad installation condition.
2. Strong Compatibility
The structure can not only fit for different PV kits, but also work with different PV arrangements which can be interchange randomly.
3. Safety and Reliability
Load-bearing,wind resistance and seismic resistance has been given sufficient consideration. All of these functions have beentested extremely, which will ensure the safety of the system.
4. Easy Installation
Most of the parts can be pre-assembled on factory, which not only can to save your install time, but also your cost.
5. Flexibility
Considering the construction error, the structure has been well-design that make it can adjust flexibly.
6. Warranty
10-year warranty for the mounting system and 25 years service time.
Mounting Parts OEM
| OEM parts | application |
| middle clamp with rubber | for modules connection |
| end clamp with rubber | for module connection |
| hook | for tile roof connection |
| up-right bracket | for corrugated metallic roof connection |
| joint bracket | for corrugated metallic roof connection |
| double-thread screw bracket | for corrugated metallic roof connection |
| rails | as rails |
| purline | ground mounting system |
| beam | ground mounting system |
| ground screw | ground mounting system |
| steel pile | ground mounting system |
Specifications:
1. Primary Technical Data
1) Chemical composition
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Impurity |
Al |
|
6063 |
0.2-0.6 |
0.35 |
0.1 |
0.1 |
0.45-0.9 |
0.1 |
0.1 |
0.1 |
0.15 |
Rest |
|
6061 |
0.4-0.8 |
0.7 |
0.15-0.4 |
0.15 |
0.8-1.2 |
0.04-0.35 |
0.25 |
0.15 |
0.15 |
Rest |
|
6060 |
0.3-0.6 |
0.1-0.3 |
0.1 |
0.1 |
0.35-0.6 |
- |
0.15 |
0.1 |
0.15 |
Rest |
|
6005 |
0.6-0.9 |
0.35 |
0.1 |
0.1 |
0.40-0.6 |
0.1 |
0.1 |
0.1 |
0.15 |
Rest |
2) Mechanical property
|
Alloy |
Temper |
Tensile strength |
Yield strength |
Elongation |
|
6063 |
T5 |
≥ 160Mpa |
≥ 110Mpa |
≥ 8% |
|
T6 |
≥ 205Mpa |
≥ 180Mpa |
≥ 8% |
|
|
6061 |
T6 |
≥ 265Mpa |
≥ 245Mpa |
≥ 8% |
3. Surface Treatment of Sections
|
|
(μm),not diminish than |
acid-resistant |
abrasion resistance |
|||
|
(Min-average film |
(Min-part film |
CASS |
(S) |
|
||
|
(h) |
Class |
(f, g /μm) |
||||
|
AA10 |
10 |
8 |
16 |
≥9 |
≥50 |
≥300 |
|
AA15 |
15 |
12 |
32 |
≥9 |
≥75 |
≥300 |
|
AA20 |
20 |
16 |
56 |
≥9 |
≥100 |
≥300 |
|
AA25 |
25 |
20 |
72 |
≥9 |
≥125 |
≥300 |
Competitive Advantage:
1. Easy installation
2. Wide application
3. High quality solar clamps
4. Fast Delivery
5. Customized designed offer
FAQ For Saving Your Precious Time!
Q1: What's the thickness for anodizing?Can you do 15um?
A: Our normal thickness is about 10 um.Yes, we can do 15um and above.
Q2: What color you can do for powder coating?The thickness for powder coat?
A:We can do any color for powder coat as long as you can provide the color sample.Our normally powder coating thickness is 60-80um.
Q3: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc.If you need any other colors, we can do according to the color samples you provide.
Q4: How's the weather resistance for wood grain finish D1010?
A: (1). Powder:Akzo Noble Interpon D1010.
(2). Wood grain film:Italian Menphis.
(3). Standard complied:American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather:10 years color guarantee.
Q5: What certification do you have?What's your standard?
A: We have ISO certification.Our standard is DIN, AAMA, AS/NZS, China GB.
Q6: What's the delivery time for samples and mass production?
A: (1). 2-3 weeks to make the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
